Din Rail Mount 40W DC to DC Converter
Din Rail Mount 40W DC to DC Converter
Product: RPS40-24-1D
- Efficiency up to 85 %
- Full Power between -25°C to +50°C
- Protection against short circuit , overload
- Cooling by free Air convection
Brief Specifications
| Input Voltage | 90 - 305 VDC |
| Input Frequency | 50/60 Hz |
| Inrush Current | < 25 Amps; Measured at 110 VDC, 25°C Ambient, Cold start |
| Output Voltage | 24VDC |
| Output Power | 40 W |
| Voltage Tolerance | ± 1 % |
| Line Regulation | < 1% of Vout |
| Load Regulation | ± 1 % |
| Turn On Time | < 2 sec; at full load |
| Hold Up Time | > 25 mS at 24 V & > 16 mS at 28 V @ 100 / 305 VDC, Full Load |
| Rise Time | < 100 ms |
| Overload Protection | > 110% of rated output current; Hiccup type; Autorecovery |
| Overvoltage Protection | Latched type; Input AC power to be recycled to recover the power supply |
| Output Short Circuit Protection | Hiccup mode when output is shorted; Autorecovery type |
| Operating Temperature | - 25°C to + 70°C; De-rate linearly above 50°C from 100 % load at 50°C to 50 % load at 70°C,- 25°C to 0°C start-up is guaranteed with specification deviation |
| Storage Temperature | - 40°C to + 85°C |
| Cooling | Natural convection cooled |
| Humidity | 5 to 95 % RH, Non condensing |
| Altitude | 2000 m |
| Dimension | 35 x 90 x 60 mm ( W x H x D ) |
| Weight | < 150 gms |
| < 150 gms | 35 mm DIN Rail |
Product Variants
Downloads
- Sorry, file does not exists.
- Sorry, file does not exists.